Disaster-causing mechanisms and advances in prevention and control technologies for floor heave in operating electrified railway tunnels
Song Zhanping1,2,3,Ren Zhenzhong2,3,Xu Xiaojing1,3,Shen Xiaole1,3,Liang Di1,3,Cheng Yun4
( 1. School of Civil Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, Shaanxi, China;
2.School of Future Technology, Xi'an University of Architecture and Technology, Xi'an 710055, Shaanxi, China;
3. Shaanxi Key Laboratory of Geotechnical and Underground Space Engineering, Xi'an 710055, Shaanxi, China;
4.School of Civil Engineering, Yancheng Institute of Technology, Yancheng 224051, Jiangsu, China)
Abstract: With increasing service life and growing operational complexity, floor heave in electrified railway tunnels in service has become a typical long-term distress affecting structural safety and track smoothness. To address the challenges posed by the complex causative factors of invert heave, the insufficient understanding of its multi-field coupling mechanisms, and the limited specificity of existing mitigation measures, a unified analytical framework based on strength degradation–load disturbance–environmental deterioration was established through a comprehensive literature review and theoretical analysis. Within this framework, the deformation characteristics, evolutionary mechanisms, and mitigation technologies of tunnel invert heave under different lithological conditions were systematically summarized. Invert heave in expansive rock masses was found to be primarily controlled by water-induced swelling and softening; invert heave in soft rock was mainly governed by rheological extrusion and plastic deformation; and invert heave in hard brittle rock masses was closely associated with bedding instability, fatigue crack propagation, and localized flexural failure. The bearing capacity of the tunnel foundation was reduced by groundwater through softening, hydraulic pressure, and seepage effects, while a fatigue-driven positive feedback cycle under hydro-mechanical coupling was formed through the combined effects of groundwater and cyclic train loading. The evolution of invert heave toward an electro-chemo-hydro-mechanical coupled process was further promoted by stray currents through material corrosion, ion migration, and alterations in the hydrochemical environment. Based on these three dominant mechanisms, a staged evolutionary model was proposed, in which invert heave was considered to progress from initial activation to damage initiation, crack propagation, and ultimately bearing capacity failure. Construction defects were identified as initial weak zones, and their amplifying effects on distress development under multi-field coupling were demonstrated. On this basis, a prevention and mitigation framework integrating dominant mechanism–lithological type–service environment was established. Future research directions, including time-dependent constitutive modeling, multi-source monitoring and early warning systems, and functional grouting materials, were also proposed, thereby providing a reference for the mechanistic understanding and precision mitigation of invert heave in electrified railway tunnels.
宋战平, 任振中, 许晓静, 沈晓乐, 梁迪, 程昀. 运营电气化铁路隧道底鼓致灾机理及防治技术动态与展望[J]. 隧道与地下工程灾害防治, .
Song Zhanping, Ren Zhenzhong, Xu Xiaojing, Shen Xiaole, Liang Di, Cheng Yun. Disaster-causing mechanisms and advances in prevention and control technologies for floor heave in operating electrified railway tunnels. Hazard Control in Tunnelling and Underground Engineering, 0, (): 1-35.