Abstract: Traditional methods for measuring segment dislocation in shield tunnels suffer from disadvantages such as high equipment costs and low computational efficiency. To address these issues, an intelligent inspector based on a Client/Server(C/S)architecture was designed and developed. For the hardware, the Raspberry Pi 4B was employed as the main control module, integrated with a binocular camera equipped with a CMOS sensor and an LED display, to enable real-time image acquisition and display. On the software side, a decoupling of the front-end and back-end functions was implemented based on the TCP/IP protocol. The client(front-end), deployed on the intelligent inspector, handled camera invocation, image acquisition, data transmission, and result visualization. The server(back-end), deployed on a consumer-grade computer, was responsible for data listening, invoking the core binocular vision ranging algorithm, and returning the results. The proposed inspector was applied to a section of the Fuzhou Binhai Express Line shield tunnel. The experimental results showed that the calculated values agreed well with the measurements from a weld gauge, achieving a sub-millimeter accuracy in segment dislocation measurement. A single detection took only 5.40 seconds, effectively improving inspection efficiency while ensuring measurement accuracy. This study provides a new approach for the rapid and accurate inspection of segment dislocation in shield tunnels.
[1] 葛双双, 高玮, 汪义伟, 等. 我国交通盾构隧道病害、评价及治理研究综述[J]. 土木工程学报, 2023, 56(1): 119-128. GE Shuangshuang, GAO Wei, WANG Yiwei, et al. Review on evaluation and treatment of traffic shield tunnel defects in China[J]. China Civil Engineering Journal, 2023, 56(1): 119-128. [2] 莫伟樑, 杨雨冰, 林越翔, 等. 基于OFDR技术的盾构隧道管片错台变形测量与计算方法[J]. 现代隧道技术, 2022, 59(5): 179-187. MO Weiliang, YANG Yubing, LIN Yuexiang, et al. Measurement and calculation method for shield tunnel segment dislocation deformation based on OFDR technology[J]. Modern Tunnelling Technology, 2022, 59(5): 179-187. [3] JIAO T, ZHOU Z. An optical-electrical co-sensing tape for cross-sectional deformation monitoring of shield tunnels[J]. Tunnelling and Underground Space Technology, 2021, 117: 104148. [4] ZHANG L, CUI Y F, SHI B. Complex deformation monitoring of shield tunnel segment joints using distributed fiber optic sensing technology: experimental verification[J]. IEEE Sensors Journal, 2022, 22(4): 3236-3245. [5] 鲍艳, BOM Kim Il, 李文海, 等. 基于点云的地铁盾构隧道环内管片错台量与接缝张开量检测方法[J]. 城市轨道交通研究, 2023, 26(9): 143-149. BAO Yan, BOM K I, LI Wenhai, et al. Detection method for metro shield tunnel inner-ring segment staggering and joint opening based on point cloud[J]. Urban Mass Transit, 2023, 26(9): 143-149. [6] 卢建军, 李文海, 燕樟林, 等. 螺栓孔特征点云支持下的地铁盾构隧道环缝识别与环间错台量分析[J]. 测绘通报, 2022(9): 6-11. LU Jianjun, LI Wenhai, YAN Zhanglin, et al. Circumferential seam detection and analytics of segment misplacement between rings of subway shield tunnels based on featured point cloud of bolt holes[J]. Bulletin of Surveying and Mapping, 2022(9): 6-11. [7] YU A, MEI W. Deep-learning-based longitudinal joint opening detection method for metro shield tunnel[J]. Tunnelling and Underground Space Technology, 2024, 154: 106108. [8] HOU S K, OU Z G, HUANG Y Q, et al. Pixel-level crack segmentation of tunnel lining segments based on an encoder-decoder network[J]. Frontiers of Structural and Civil Engineering, 2024, 18(5): 681-698. [9] CHEN C X, SHEN P. Research on crack width measurement based on binocular vision and improved DeeplabV3+[J]. Applied Sciences, 2023, 13(5): 2752. [10] ZHANG Z C, SHEN Z J, LIU J T, et al. A binocular vision-based crack detection and measurement method incorporating semantic segmentation[J]. Sensors, 2024, 24(1): 3. [11] 关振长, 陈东, 徐铭泽, 等. 基于双目视觉的管片错台精确测量方法[J]. 清华大学学报(自然科学版), 2025, 65(7): 1359-1367. GUAN Zhenchang, CHEN Dong, XU Mingze, et al. Accurate measurement method for segment dislocation using binocular vision[J]. Journal of Tsinghua University(Science and Technology), 2025, 65(7): 1359-1367. [12] ZHANG J, CHU W, TU W, et al. Computer vision-based monitoring method for differential settlement of shield tunnels[J]. Journal of Physics: Conference Series, 2023, 2519: 012057. [13] 江正, 刘辉, 向先波. 基于C/S架构的船舶电站网络化无线监控系统设计[J]. 中国造船, 2015, 56(4): 179-187. JIANG Zheng, LIU Hui, XIANG Xianbo. Wireless network monitoring system for ship power station based on C/S architecture[J]. Shipbuilding of China, 2015, 56(4): 179-187. [14] 胡欣, 王生辉, 常娅姝, 等. 基于STM32的塔机数据采集和监控系统设计[J]. 仪表技术与传感器, 2024(4): 53-58. HU Xin, WANG Shenghui, CHANG Yashu, et al. Design of data acquisition and monitoring system for tower crane based on STM32[J]. Instrument Technique and Sensor, 2024(4): 53-58. [15] 熊雪钧, 谭力波, 张俊杰, 等. 基于FPGA的低延迟TCP协议栈实现[J]. 电子测量技术, 2020, 43(11): 43-48. XIONG Xuejun, TAN Libo, ZHANG Junjie, et al. Design and implementation of low latency TCP stack on FPGA[J]. Electronic Measurement Technology, 2020, 43(11): 43-48. [16] 陈东. 基于双目视觉的盾构隧道管片错台精确测量及软硬件实现[D]. 福州: 福州大学, 2025: 31-54. CHEN Dong. Accurate measurement of shield tunnel segment dislocation based on binocular vision and its software-hardware implementation[D]. Fuzhou: Fuzhou University, 2025: 31-54. [17] ZHANG Z Y. A flexible new technique for camera calibration[J]. IEEE Transactions on Pattern Analysis and Machine Intelligence, 2002, 22(11): 1330-1334. [18] LI J,WANG P, XIONG P, et al. Practical stereo matching via cascaded recurrent network with adaptive correlation[C] //Proceedings of 2022 IEEE/CVF Conference on Computer Vision and Pattern Recognition. New Orleans, USA: IEEE, 2022: 16242-16251. [19] 陈浩安, 李晖, 黄瑞, 等. 基于树莓派4B的无人机动态追踪平台设计[J]. 电子测量技术, 2024, 47(6): 182-189. CHEN Haoan, LI Hui, HUANG Rui, et al. Design of dynamic tracking platform for unmanned aerial vehicle based on Raspberry Pi 4B[J]. Electronic Measurement Technology, 2024, 47(6): 182-189. [20] 关振长, 陈东, 谢立夫, 等. 用于工程表观质量检测的便携式双目相机:中国, 202420197345.X[P]. 2024-09-13. [21] 韦莉. 固体分析仪在聚乳酸3D打印线材热性能与动态热机械性能研究中的应用[J]. 塑料工业, 2024, 52(9): 99-103. WEI Li. Applications of the solid analysis instrument in the researches of thermal properties and dynamic thermomechanical properties of 3D printed polylactic acid filaments[J]. China Plastics Industry, 2024, 52(9): 99-103.
2025, Vol. 7 
